[HEADER]
VERSION=2

[TRACTION]
TYPE=RWD

[GEARS]
COUNT=6
GEAR_R=-3.44
GEAR_1=3.483		
GEAR_2=2.015		
GEAR_3=1.391	
GEAR_4=1.00
GEAR_5=.719	
FINAL=4.30

[DIFFERENTIAL]
POWER=0.95
COAST=0.06
PRELOAD=100

[GEARBOX]
CHANGE_UP_TIME=230		; change up time in milliseconds
CHANGE_DN_TIME=280		; change down time in milliseconds
AUTO_CUTOFF_TIME=220		; Auto cutoff time for upshifts in milliseconds, 0 to disable
SUPPORTS_SHIFTER=1		; 1=Car supports shifter, 0=car supports only paddles 
VALID_SHIFT_RPM_WINDOW=800			;range window additional to the precise rev matching rpm that permits gear engage.
CONTROLS_WINDOW_GAIN=0.4			;multiplayer for gas,brake,clutch pedals that permits gear engage on different rev matching rpm. the lower the more difficult.
INERTIA=0.021							; gearbox inertia. default values to 0.02 if not set

[CLUTCH]
MAX_TORQUE=850							; Clutch torque 

[AUTOCLUTCH]
UPSHIFT_PROFILE=NONE			; Name of the autoclutch profile for upshifts. NONE to disable autoclutch on shift up
DOWNSHIFT_PROFILE=DOWNSHIFT_PROFILE	; Same as above for downshifts
USE_ON_CHANGES=0				; Use the autoclutch on gear shifts even when autoclutch is set to off. Needed for cars with semiautomatic gearboxes. values 1,0
MIN_RPM=1200					; Minimum rpm for autoclutch engadgement
MAX_RPM=1800					; Maximum rpm for autoclutch engadgement

[UPSHIFT_PROFILE]
POINT_0=36				; Time to reach fully depress clutch
POINT_1=100				; Time to start releasing clutch
POINT_2=208				; Time to reach fully released clutch

[DOWNSHIFT_PROFILE]
POINT_0=20								; Time to reach fully depress clutch
POINT_1=300								; Time to start releasing clutch
POINT_2=900				; Time to reach fully released clutch

[AUTOBLIP]
ELECTRONIC=0				; If =1 then it is a feature of the car and cannot be disabled
POINT_0=30				; Time to reach full level
POINT_1=160				; Time to start releasing gas
POINT_2=200			; Time to reach 0 gas
LEVEL=0.9				; Gas level to be reached

[DAMAGE]
RPM_WINDOW_K=100

[AUTO_SHIFTER]
UP=7000
DOWN=4200
SLIP_THRESHOLD=0.95
GAS_CUTOFF_TIME=0.31

[DOWNSHIFT_PROTECTION]
ACTIVE=0
DEBUG=0				; adds a line in the log for every missed downshift
OVERREV=1500		; How many RPM over the limiter the car is allowed to go
LOCK_N=0